Description

Any owner of a bay window Volkswagen who uses their phone for sat-nav, music or as a speedo will know the frustration that is having nowhere to put it… Trying to balance it on the dash in front of you, or laying on your seats meaning you have to take your eyes off the road to view it. Existing phone holders aren’t very good: suction cups are big and obstruct your vision and the cradle type drop your phone at the first sight of a bump in the road.

This is my solution. It sits right on your bay window screen dash. Clearly visible to driver and passenger, it will hold phones up to 13mm thick. It is shipped as a kit that screws together (screws provided) but requires no modifications to the vehicle; simply peel away the sticky tape and put in place,. The adhesive is very firm as well as non-permanent, meaning you can take this holder off at any time without leaving marks. Tested for years in hot sun and freezing cold in my own vehicle and many customers, it will not deform.

The back clip is sprung to accommodate different phone widths up to 90mm. It’s not limited on length. To use, insert the top of the phone and lift the sprung clip then drop the bottom edge of the phone into the slot.

This is a 3D printed product, but it’s made from a heat resistant material, is tough and will tolerate life in your bus just fine. Due to the manufacturing process there are fine ridges on the surface of the parts: this is totally normal. They can be rubbed down with glass paper and painted like any other plastic should you wish, but I only offer them ‘as manufactured’.