Description

Any owner of a Classic Range Rover that uses their phone for sat-nav will know the frustration that is having nowhere to put it… Balancing it on the dash or putting it between your seats meaning you have to take your eyes off the road to view it isn’t ideal. Existing phone holders aren’t very good: suction cups are big, cumbersome and obstruct your vision and the cradle type drop your phone at the first sight of a bump in the road.

This is my solution. It screws to the tray in the middle of your dash, clearly visible to driver and passenger. The regular groove and clip can hold phones up to 13mm thick however, if this is not big enough, the large groove and clip can hold phones up to 16mm thick. It is shipped as a kit that screws together (screws provided) but requires no modifications to the vehicle; simply remove the rubber mat and mounting screws and replace with the ones supplied in the kit. It’s not permanent and can be easily removed. That’s it!

The back clip is sprung to accommodate different phone widths up to 90mm. It’s not limited on length. To use, insert the top of the phone and lift the sprung clip then drop the bottom edge of the phone into the slot.

This is a 3D printed product, but it’s made high-temperature material, is tough and will tolerate life in a Land Rover just fine. Due to the manufacturing process there are fine ridges on the surface of the parts: this is totally normal. They can be rubbed down with glass paper and painted like any other plastic should you wish, but I only offer them ‘as manufactured’.